1/4 HP Water Chiller Cooler for Cold Plunges, Aquariums, Reservoirs, Hydroponics

Our 1/4 horsepower water chiller pushes 264-660 gallons/hour. This is a great choice for larger cold plunges. Our chillers ship fast and you can trust we will stand by our products.

***These are not 230v units!  They are 110V, made for use in the US! ***

Notes regarding compatibility: The chiller is shipped with fittings for 1" tubing (inner diameter approx. 19 to 20mm). It is shipped with one pair of straight and one pair of 90° angled fittings.

Note for first-time users:

If you should have problems with your chiller please contact us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product!

***Important Notes: This product is only for shipment in the continental US 48 states. Do not order if you are outside this area as we will not be able to deliver this. This product will only be shipped via UPS. This product is NOT returnable once the box is open. We can offer support and/or a replacement part if their is an issue but, the chillers cannot be returned once they are used for any period of time. Please do not order this if you are inexperienced at watercooling and not capable to help support the product if there is a need for a part swap. Please, this is not equipment for novices or those that just want to "experiment". Please email us first if you have any questions regarding these policies or the product itself. ***

Technical specifications:

• Power: 1/4 HP
• Power consumption: 190W
• Cooling capacity: 390W (suitable for extreme OC and cooling)
• Recommended coolant flow: 500-2500 l/h
• Weight: 18.6kg
• Cooling agent: R134A
• Dimensions: 448x330x440mm (LxWxH)
• Connector outside diameter: 18-20mm
• Heat exchanger material: Titanium
• max. compressive load: 0.8bar
• Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps
• current demand: 1.8 A (50 Hz)
• current drain: 414 W

Scope of Delivery:

• 1x Waterchiller
• 2x 45° angle with rubber seal
• 2x rubber seal with G1/4" internal thread
• 2x suitable hose clamps